CAN/AM Power Products box's
The CAN/AM boxes that Rob and I designed and built make wiring newer EFI Nissan engines into our old Datto's, or any cars for that matter, much simpler. These boxes take the place of the point to point wiring that would normally be done by us "do it yourselfers." Making the wiring easier for the new to wiring guys by following the drawings, which are also under construction. Using this box cuts HOURS out of the EFI wiring as well, I've wired countless Nissan engines and from now on I'm going to use these boxes. SO SO much faster and cleaner. Use this link to see how it works with each engine.
By hooking up a constant power to the box from the battery then connecting the 15 or less screw terminals your done! Then when it comes time to trouble shoot there are 6 leds, 3 that let you know if the fuses are bad and then 3 that turn on with the relays.
There are a few fully assembled. We made a limited run, hopefully they will sell so we can keep making them. Soon I will have all the wiring charts in the how to section to work with every motor. 150 bucks and well worth it, I will ship it for free if you live in the lower 48.
CAN/AM Production easy wiring boxes for EFI works for KA's SR's VG's CA's and more
Posted 22 January 2011 - 10:29 PM
CAN/AM Power Products box's
"People don't like it when shit doesn't match their rule of thumb." Sam
Posted 23 January 2011 - 03:26 PM
I'm peaceful sleepy giant making zero a year...
Posted 24 January 2011 - 02:55 AM
Posted 24 January 2011 - 05:12 AM
my 210 project
Posted 24 January 2011 - 07:21 AM
Smokin' Joe's House of Datto's
Member- *Japanese Trucking Association*
**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~
ratsun.net rising sun stickers ratsun business cards order thread
620 KA24 Motor Mount Swap Brackets
1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear
Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.
You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"
Posted 25 January 2011 - 11:04 AM
This most likely is a stupid question but what does it do?
Is some sort of engine management?
Or does it just make wiring simpler?
For KA/SR swaps. Keeps the wiring & relays clean. Just attach wires, done...
Go eat a bowl of dicks
Posted 25 January 2011 - 12:11 PM
I cant open file to see photo.I think youll sell alot of these. Most will never be used but youll sell alot of these!
Austrailia baby thats where its at!!!!!!!!!!!