Jump to content


Photo

620 SR20 Motor Mounts


  • Please log in to reply
21 replies to this topic

#1 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 21 February 2018 - 09:49 AM

Finally have a production run done. SR20DE to 620 Motor Mounts. Other than these mounts and relocating the alternator, this swap is the same as the 240SX KA24 swap. 

 

IMG_5078.JPG


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#2 5t341tH

5t341tH
  • Location:Huntington Beach, CA
  • Cars:78 620, 13 GenCoupe, 85 GS700e, 01 CBR600

Posted 21 February 2018 - 11:29 AM

Will this work for sr20det?

#3 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 21 February 2018 - 03:53 PM

Yes. Turbo placement may be an issue. 


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#4 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 21 February 2018 - 04:21 PM

There have only been DETs installed with these mounts. I guess not having that in the title might be a bit confusing,  


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#5 5t341tH

5t341tH
  • Location:Huntington Beach, CA
  • Cars:78 620, 13 GenCoupe, 85 GS700e, 01 CBR600

Posted 21 February 2018 - 09:20 PM

Hey I’ve been talking to you on fb. Please post up mock up pictures when you get a chance. Also what engine mounts? 620 or 240sx? Also, what do you mean by alternator relocate? Stock placement won’t work?

#6 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 23 February 2018 - 07:11 AM

1977 620 motor mounts. The SR mounts don't match the frame side. 

 

The alternator sits really low on the SR, it is a known issue with the swap in most every car. Most guys swap to a smaller alternator. I am hoping to get my hands on a stock bracket soon so I can work up a way to use the stock alternator. 

 

Still trying to find the pics I was sent.  :blush:


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#7 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 23 March 2018 - 01:46 PM

Another run ready to ship. I now have the KA & SR covered for the 521, 620 & 720.  :)

 

 

IMG_5479.JPG


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#8 521turbo

521turbo
  • Location:Miami
  • Cars:'71 521

Posted 31 May 2018 - 01:41 AM

Will these mounts work for a 521. Also do they utilize the stock 521 mounts? Also how much?

#9 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 31 May 2018 - 05:54 AM

I have mounts for swapping the SR into the 521. PM Sent. :)

Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#10 MantisX620

MantisX620
  • Location:North Carolina
  • Cars:1977 Six Twenty Turbo, 93 Integra Turbo

Posted 12 June 2018 - 08:35 PM

Here are some pictures so that others can see how these mounts place the SR20det. Im very happy with the fitment. I had a mini stroke getting it in there but I have that issue with every engine I put in/take out.

 

kcBYVGN.jpg

oq3xuHd.jpg

gRtMuNl.jpg

 

Also, visual proof that the aluminum engine is alot lighter. Ill need to lower the front end again lol.

bAlNINH.jpg

 

The only clearance issues ive run into so far is the wastegate and the alternator. A slight shift in the wastegate mount should clear it easy. I am going to try a few things to try to get the stock alt to work, but if not I will go the Justy route.

 

Thanks Redeye for a great product!

 

MantisX



#11 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 13 June 2018 - 06:00 AM

Thank you for the pics. Looks great  :wub:

 

Any tips for others doing the swap? 

 

 

FYI, I am still working up an alternator relocation bracket, but it will still probably be a bit before I have a final part. 


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#12 MantisX620

MantisX620
  • Location:North Carolina
  • Cars:1977 Six Twenty Turbo, 93 Integra Turbo

Posted 13 June 2018 - 07:21 AM

Thank you for the pics. Looks great  :wub:

 

Any tips for others doing the swap? 

 

 

FYI, I am still working up an alternator relocation bracket, but it will still probably be a bit before I have a final part. 

 

The passenger side mount gave me the most grief lining up. So I removed the driver side rubber mount to get better position on the passenger side. Once I got the passenger mount to fall in, I lifted the engine just enough to get the driver side rubber bolted up and sat it down. I havent gotten around to putting the trans on yet as im waiting for a clutch. I may end up having to drop the engine to get the trans on, but my eyeball measurement says the trans should go on without having to move the engine.

 

MantisX



#13 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 13 June 2018 - 08:28 AM

You're going to have a tough time getting the trans over the clutch. You will want to move the motor forward while you get the transmission into position, then bolt up the motor and trans. After that install all three mounts loosely with everything close before settling the motor and trans onto the frame. 


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#14 2wheel-lee

2wheel-lee
  • Location:Orange County, CA
  • Cars:1975 Datsun 620, 2006 Dodge Ram w/Cummins

Posted 13 June 2018 - 09:12 AM

I can't remember the reason other than the obvious, but why can't you install the engine with the trans attached? Does it just not angle down enough? I'm finally getting closer to doing my swap....just waiting until I get my garage a little more cleaned up to where I have room to work. 



#15 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 13 June 2018 - 10:55 AM

You can but it is a balancing act of the truck high enough and the tilt angle kicked enough. 

 

 

Next truck I build gets the upper core support cut and a removable section made. :lol:


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#16 2wheel-lee

2wheel-lee
  • Location:Orange County, CA
  • Cars:1975 Datsun 620, 2006 Dodge Ram w/Cummins

Posted 14 June 2018 - 07:48 AM

You can but it is a balancing act of the truck high enough and the tilt angle kicked enough. 

 

 

Next truck I build gets the upper core support cut and a removable section made. :lol:

 

OK, that's what I thought. I just did a similar exercise with a Samurai, and I also reached the peak of my picker. 

 

I have an extra '75+ core support I was thinking of cutting and using as a cap for the section I remove from the truck's core, if I decide to go that route.  



#17 3BK

3BK
  • Cars:Datsun 620

Posted 29 June 2018 - 09:11 AM

Hey ]2eDeYe would like to know how much you looking for those sr20det motor mount for 620

#18 ]2eDeYe

]2eDeYe
  • Location:Marysville, WA
  • Cars:78 620 KC, 77 620 KC, 72 CJ5, 04 G35 coupe mmmm

Posted 29 June 2018 - 11:57 AM

Hey ]2eDeYe would like to know how much you looking for those sr20det motor mount for 620

 

PM Sent :)


Smokin' Joe's House of Datto's

gJv38AY.jpg
Member- *Japanese Trucking Association*

**DATSUN FAQ** ~ If ya know it, post it ~ If ya don't know it, learn it ~

ratsun.net rising sun stickers                     ratsun business cards order thread

620 KA24 Motor Mount Swap Brackets

1977 620 KingCab Deluxe KA24DE Swap - Refresh and cleanup
1978 620 kingcab 4x4 - KA24E SAS w/Dana 44 front and Toyota rear

1967 RL411 Station Wagon

 

Whenever I think that I'm out of my mind for putting this much time and money into an old Datsun, all I have to do is look some of your threads to know that I'm not nearly as whack as you are.

You're going to skin a few knuckles, stand up too fast and bump your head, hunt around the floor for the nuts and bolts you dropped, invent a few new cuss words and when you're finished you'll say "That wasn't so hard after all!"


#19 Charlie69

Charlie69
  • Location:Tolleson, AZ
  • Cars:1966 520, 1967 520, 1985 720 ST King Cab, 1986 720 King Cab

Posted 02 July 2018 - 06:51 PM

Just an insight on core support cutting to make removeable.  Cut the core support as wide as you can the first time.  A narrow opening is all most as good as no opening.



#20 Charlie69

Charlie69
  • Location:Tolleson, AZ
  • Cars:1966 520, 1967 520, 1985 720 ST King Cab, 1986 720 King Cab

Posted 02 July 2018 - 06:53 PM

Are thes mounts designed for the 240SX KA or SR?  Or will they work with a truck KA as well?